Your present location:Home >> Products >> Supermicro >> SYS-7046GT-TRF
Goods


Specifications

 

Product SKUs
SYS-7046GT-TRF
  • SuperServer 7046GT-TRF (Black)
 
Motherboard
Super X8DTG-QF
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
GPU
  • Supports 4x Nvidia Fermi C2050, C2070, or C2075 GPU Cards
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM slots
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Dual Intel® 5520 (Tylersburg) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
Network Controllers
  • Intel® Dual 82574L Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • Matrox G200eW
Super I/O
  • Winbond 83827HF chip
 
Expansion Slots
PCI-Express
  • 4 (x16) PCI-E 2.0 slots
  • 2 (x4) PCI-E 2.0 (in x16 slots)
  • 1 (x4) PCI-E (in x8 slot)
PCI
  • 2x 33MHz PCI slots
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
USB
  • 4x USB rear ports
  • 2x USB on-board
  • 1x USB internal header - 2 ports
  • Total 8 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 4U Rackmountable / Tower
  • Optional Rackmount Kit
Model
 
Dimensions
Height
  • 17.8" (452mm)
Width
  • 7" (178mm)
Depth
  • 26.5" (673mm)
Gross Weight
  • 72 lbs (32.7kg)
Package
  • 38.6" x 26.6" x 17.4"
Available Color
  • Dark Gray
 
Front Panel
Buttons
  • LED Power On/Off button
  • System Reset button
LEDs
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Ports
  • 2x Front side USB Ports
 
Drive Bays
Hot-swap
  • 8x 3.5" Hot-swap SAS/SATA Drive Bays
  • Supports up to 6 SATA Drives
Peripheral Bay(s)
  • 3x 5.25" drive bays in storage module -  rotates 90° for Rackmount
  • 1x 3.5" fixed drive bay
 
SAS / SATA Backplane
SAS / SATA Hard Drive Backplane with SES2
 
System Cooling
Fans
  • 4x 5000 RPM Hot-swap Cooling Fans
  • 2x 5000 RPM Hot-swap Rear Exhaust Fan
 
Power Supply
1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
  Gold Certified
  Test Report ]
Note: Does not support redundancy for 100-140Vac, 
will need two 1200W modules to operate.

 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Product Skus